Chemical Equipment Co., Ltd. Shandong Cheng Ming teaches you some of the issues and experience in the use of glass-lined equipment process encountered: static puncture glass-lined equipment do you know, here in Shandong Cheng Ming technology department to introduce you: glass-lined reactor within stir liquids with suspended solids and suspended solids enamel strong friction, while the suspension itself create friction, thus creating a lot of static charge, high electrostatic charge on the enamel puncture a strong role, leading to enamel pitting, Therefore stirring speed is not too fast. On the temperature difference between the rapid change of enamel glass-lined reactor equipment damage when hot material inside the reactor at a time when the temperature and the temperature of the glass-lined layer of material or less, if at this time to the reactor jacket suddenly pass into the cold Media enamel open retort, then it tends to cause damage to the glass-lined. If the reactor within the reaction is exothermic or endothermic violent reaction severe if not properly controlled it can easily cause damage to the glass-lined. The operation should pay attention to the material to be added to the center of enamel reactor, and to start the agitation and to control the reaction rate. Said that, there is a special case of glass-lined closed retorts, although the temperature difference within the permitted range, but in and under the action of mechanical force can damage the enamel glass lined. This generally occurs in the reaction vessel was heated with steam and enamel cooling medium (e.g., through a pipe into the water jacket), the closed end of the cycle when the hot steam, the steam is condensed to form a vacuum over, if the cooling water valve is not connected with the jacket off, then the cooling water will be sucked jacket so the impact of metal matrix Restructuring stress reaction tank damaged porcelain. Or more simply to introduce the rapid change of the temperature difference between enamel glass lined reactor equipment damage retort, so users should be avoided during the above operation, thus better quality assurance glass-lined equipment, good use of prolonged reactor lifetime. Stainless steel retort, Shangluo retorts, Shandong Chemical provided by Cheng Ming Cheng Ming Chemical Equipment Co., Ltd., Shandong. Chemical Equipment Co., Ltd. Shandong Cheng Ming (www.cmchemical.net) strong, credible, Shandong Zibo Chemical Equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly innovative ideas will lead the drive to improve the chemical and you work out into the brilliant, for a better future!